17
BL-C230A
5 Location of Controls and Components
5.1. Understanding the Camera Indicators
The camera’s indicators light as follows according to the status of the camera. Understanding how and when the indicators light can
help you troubleshoot problems with the camera.
The POWER indicator
The AV LINK indicator
Camera Status or Operation Indicator Color and Pattern
Normal Operation Green
When power is turned on (camera is starting up) Orange→Flashing orange
Obtaining IP address via DHCP Flashing green
LAN cable not connected or no LAN connection Orange
Automatic Setup Flashing green→Green
Updating firmware Flashing orange
Factory reset (by software or by pressing the FACTORY
DEFAULT RESET button)
Flashing orange→Off→(The camera restarts)
UPnP™ port forwarding error Flashing orange (2-second intervals)
Privacy mode activated Red
Camera failure Flashing red
Camera Status or Operation Indicator Color and Pattern
No TVs are registered to the camera Off
The camera can communicate with at least one TV in its device
list
Green
The camera cannot communicate with any of the TVs in its
device list
Orange
The camera is in registration mode Flashing orange
To Next Page
Loading...
