20
BL-C230A
7 Operating Instructions
7.1. Preparation
Prepare the following before connecting the Network Camera.
• Set up software (Setup CD-ROM)
• PC to fulfill the system requirements.
• Ethernet Router for LAN Connection.
• Ethernet cable (two pieces of Category 5 straight cable).
System Requirements
Your PC and network must meet the following technical specifications in order for the camera to function properly.
*1) What is IPv6?
・IPv6 is short for “Internet Protocol Version 6”.
･ IPv6 was created to provide the additional IP addresses that will be needed as the Internet continues to expand.
･ IPv6 is expected to gradually replace IPv4, with the 2 coexisting for a number of years during a transition period.
･ Though most ISPs (Internet Service Providers) do not yet support IPv6, many local networks already use it. When your ISP
supports IPv6, your Panasonic Network Camera will be ready!
･ For more information, visit http://www.ipv6.org/.
Note:
Refer to the Panasonic Network Camera website at http://panasonic.net/pcc/support/netwkcam/ for details about network
environment.
Item Requirement
Operating System Microsoft® Windows Vista®, Windows® XP Service Pack 2 or later
CPU 3.2 GHz Pentium® 4 or faster (2.13 GHz Intel® Core™ 2 Duo or faster when viewing the multi cam-
era page)
RAM 512 MB or more; 1 GB or more recommended (1 GB or more recommended when viewing the multi
camera page)
Video RAM 256 MB or more
Display 1024 x 768 resolution or higher
Protocol For IPv4 Connection
TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)
For IPv6 Connection
*1
TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ICMPv6, NDP)
Interface 10/100 Mbps network card
Wireless Interface IEEE 802.11b/g (Embedded)
Web Browser Internet Explorer® 6, Internet Explorer 7, Internet Explorer 8
Audio PC speaker or headphones (required to use the Listen feature)
Additional Software (For Viewing
Buffered MPEG-4 Images)
For Windows Vista
Windows Media® Player 11 or later
For Windows XP
Windows Media Player 9 or later
To Next Page
Loading...
