Panasonic BL-C230A - How to Change MAC Address Label

38
BL-C230A
8.15. How To Change MAC Address Label
MAC address label caution
When you replace the main board, you must also attach the new MAC address label (included with the main board). Attach the
new MAC address label to the unit by placing over the old MAC address label. Make sure the old address cannot be seen.
Throw away the old main board. It cannot be reused.
(If the MAC address of the old main board is already registered via DDNS and thenused in a different camera, the camera can-
not be used with DDNS service.)