Absence operation mode
5
Select the item to set for when no
one is in the room.
▲ ▼ →
→
(Press 2 times to nish.)
z Types of the Absence operation mode
Select the Absence operation mode from among the following 4 options on the
remote control.
• Not set
If human activity is detected, the operation status is restored according to the level of
human activity.
• [Standby]
Pauses the COOL/DRY or HEAT operation, and performs only the FAN (slight breeze)
operation.
If human activity is detected, the operation status is restored according to the level of
human activity.
• [Stop (no restart)]
Stops the operation. After stopped, the operation is not resumed even if human activity is
detected.
• [Stop (restart)]
Stops the operation. After stopped, the operation is resumed if human activity is detected,
and the operation status is restored according to the level of human activity.
Absence operation start time
5
Set the time that elapses before
[Absence operation mode] starts.
hour minute
▲ ▼ → ► → ▲ ▼ →
→
(Press 2 times to nish.)
• 30 minutes to 3 hours* (180 minutes)
(by the 30 minutes)
* Factory default: 1 hour
Depending on the model, either of
the displays appears.
hour
▲ ▼ → →
(Press 2 times to nish.)
To Next Page
Loading...
