Panasonic CZ-RTC5B

28
(EN)
Direct/Indirect airow
5
When ECONAVI is off, select [YES].
◄ ► →
6
Select [Setting for all units] or
[Settings for individual units].
▲ ▼ →
7
Set.
 Setting for all units
▲ ▼ →
→
(Press 2 times to nish.)
• [Not set]: Operation is performed with
the set airow direction without using the
“Direct airow/Indirect airow”.
• [Direct airow]: The unit swings wind up
and down around where the person is
present.
• [Indirect airow]: The unit avoids hitting
wind at a person’s body.
 Settings for individual units
▲ ▼ → ► → ▲ ▼ → ► → ▲ ▼ →
→
(Press 2 times to nish.)
• If the airow direction of the selected air
outlet is xed, setting and changing are
not available.
Not set
Direct
Indirect
Note
z [ECONAVI] can be set only with the separately sold ECONAVI panel or holder
on the wall, etc. or indoor units equipped with the “Direct airow/Indirect airow”
function.
z [Direct/Ind. airow] can be set on the remote control for each ap of the indoor
unit.
(Only for the indoor units equipped with the [Direct/Ind. airow] function
compatible with ECONAVI)
z In the following cases, each message appears and this function cannot be used.
• When the indoor unit is not
supported, or the motion
sensor is not equipped
• When the airow
directions of the air outlets
are xed
• Locked or prohibited