Circulation
5
Only when ECONAVI is off, select
[YES].
◄ ► →
6
Select [Setting for all units] or
[Settings for individual units].
▲ ▼ →
7
Set.
Setting for all units
▲ ▼ →
→
(Press 2 times to nish.)
ON
OFF
Settings for individual units
▲ ▼ → ► → ▲ ▼ →
→
(Press 2 times to nish.)
ON
OFF
Note
z To operate the “Circulation” in HEAT mode, set the fan speed
to [AUTO], and set the airow direction to any one of [Direct
airow], [
] and [F3, F4, F5].
z In the following cases, each message appears and this function
cannot be used.
• When the indoor unit is not supported,
the motion sensor is not equipped,
or the oor temperature sensor is not
equipped
• Locked or prohibited
To Next Page
Loading...
