1
Display the menu screen.
To return to the previous screen
Press .
2
Select [nanoeX settings].
▲ ▼ →
nanoe™ X
3
Select [nanoeX].
▲ ▼ →
4
Select [Setting for all units] or
[Settings for individual units].
▲ ▼ →
5
Set.
Setting for all units
▲ ▼ →
→
(Press 2 times to nish.)
ON
OFF
Settings for individual units
▲ ▼ → ► → ▲ ▼ →
→
(Press 2 times to nish.)
ON
OFF
Note
z When you set nanoe™ X to OFF, the internal cleaning function is also set OFF.
z In the following case, the message appears and this function
cannot be used.
• When the indoor unit is not supported, or the nanoe™ X kit is not
equipped
To Next Page
Loading...
