Internal cleaning
3
Select [Internal cleaning].
▲ ▼ →
4
Select [Setting for all units] or
[Settings for individual units].
▲ ▼ →
5
Set.
Setting for all units
▲ ▼ →
→
(Press 2 times to nish.)
ON
OFF
Settings for individual units
▲ ▼ → ► → ▲ ▼ →
→
(Press 2 times to nish.)
ON
OFF
In case of nanoe™ X set to OFF,
the display shown on the right
appears.
Note
z In the following case, the message appears and this function
cannot be used.
• When the indoor unit is not supported, or the nanoe™ X kit is not
equipped
To Next Page
Loading...
