47
RQTV0136
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›]
You can transfer (copy) titles recorded on a disc onto a video cassette with
one stroke of the button.
In One Touch Transfer (copying), all contents on the disc are automatically
transferred (copied) onto the video cassette.
[1] Press and hold [— VHS, COPYING] on the main unit
for about 3 seconds or more (until “START” on the
unit’s display stops flashing).
≥Check if transfer (copying) starts properly.
≥Transferring (copying) is automatically completed when playback of
the disc is finished or the tape reaches its end.
∫To stop transfer (copying) in the middle
Press [∫, STOP] or press and hold [RETURN] for about 3 seconds or
more.
Notes
≥While One Touch Transfer (Copying) is activated, a timer recording
cannot be started.
≥If you start transfer (copying) when the resume play function (l 26) is
activated, the DVD is transferred (copied) from the beginning of the title
which you stopped.
Transfer (Copying) from DVD
∫When you transfer (copy) a whole disc
Make sure that the DVD is stopped.
≥When the resume play function is activated (l 26), press [∫, STOP]
to deactivate it.
∫When you transfer (copy) a title from the beginning of the
selected title to the end of the disc
∫When you transfer (copy) a playlist from the beginning of
the selected playlist to the last playlist
Press [1, PLAY] to play back the desired title (l 26) or playlist
(l 41).
≥You can transfer (copy) (a title or playlist) while playback is paused by
pressing [;, PAUSE].
≥You cannot transfer (copy) a playlist which is longer than 8 hours.
(When you transfer (copy) multiple playlists, the playlist which is
longer than 8 hours is omitted.)
A
ENTER
F
U
N
C
T
I
O
N
S
PLAY
PAU SESTOP
INDEX
AUDIO
DRIVE
SELECT
RETURN
RETURN
3, 4, 2, 1
ENTER
∫
FUNCTIONS
1
:, 9
;
DRIVE
SELECT
AUDIO
— VHS
COPYING indicator
∫ One Touch Transfer (copying) (DVD l VHS)
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
DVD (Recording source)
≥Press [DRIVE SELECT] to select the DVD.
≥Insert the disc containing the title to be copied. (l 17)
≥Playback the DVD. (l Left)
≥[RAM] [-RW‹VR›] Press [AUDIO] to select the audio you wish to record.
≥Stop the DVD. (l Left)
VHS (Recording target)
≥Press [DRIVE SELECT] to select the VHS.
≥Insert a video cassette with an intact accidental erasure prevention
tab. (l 17)
≥Confirm that the remaining tape time is sufficient for recording. (l 33)
≥Select the recording mode. (l 18)
Settings (l 59, TV System)
≥When transferring (copying) an NTSC disc to a tape
- Set “TV System” on “Connection” in Setup to “NTSC”.
≥When transferring (copying) a PAL disc to a tape
- Set “TV System” on “Connection” in Setup to “PAL”.
∫About Recording VISS (l 33)
When transferring (copying) from DVD to VHS, the index signal is
automatically recorded for each title. You can search desired titles with
[:, INDEX] or [9, INDEX].
Remaining time
Transfer (Copying)
RQTV0136.book 47 ページ ２００６年４月１９日 水曜日 午後１時２８分
To Next Page
Loading...
Need help?
General
