Panasonic Digital Palmcorder PV-GS69 - Recording in Natural Colors (White Balance)

Recording Mode
43
Sports Mode/Portrait Mode
• If you record a still picture in Progressive
Photoshot Mode, the brightness and hue of the
recorded still picture may become unstable.
• If this mode is used for indoors, the screen may
flicker. If so, change the [
SCENE MODE]
setting to [OFF].
Low Light Mode
• Extremely dark scenes may not be able to be
recorded with detail.
Spotlight Mode
• If the subject is extremely bright, the recorded
image may become whitish and the periphery of
the recorded image extremely dark.
Surf & Snow Mode
• If the recording subject is extremely bright, the
recorded image may become whitish.
Recording in Natural Colors
( White Balance)
Depending on the scene or lighting conditions, the
Automatic White Balance Adjustment Mode may not
be able to bring out natural colors. In this case, the
white balance can be adjusted manually.
When the Camcorder is turned on with the Lens Cap
on, the Automatic White Balance Adjustment may not
function properly. Please turn on the Camcorder after
removing the Lens Cap.
• Set to Tape/Card Recording Mode.
• The [ ] Indication and the One-Touch
Navigation icon appears.
1 Set the [AUTO/MANUAL/FOCUS] Switch to
[MANUAL].
[One-Touch Navigation icon]
5/5 NEXT
IRIS SHTR
WB
2 Move the Joystick Control [▲] to select
[ ].
• The White Balance indication appears. ([ ]
etc.)
1)
2)
3)
4)
3 Move the Joystick Control [◄] or [►] to
select a desired White Balance Mode.
BACK
WB
<
WB
>
SP 3h59m59s29f
R 2:00
►
12:34:56AM
JAN 2 2006 100
BACK
WB
<
WB
>
SP 3h59m59s29f
R 2:00
►
12:34:56AM
JAN 2 2006 100
BACK
WB
<
WB
>
SP 3h59m59s29f
R 2:00
►
12:34:56AM
JAN 2 2006 100
BACK
WB
<
WB
>
SP 3h59m59s29f
R 2:00
►
12:34:56AM
JAN 2 2006 100
BACK
WB
<
WB
>
SP 3h59m59s29f
R 2:00
►
12:34:56AM
JAN 2 2006 100
1) Automatic White Balance Adjustment [ ]
2) Indoor Mode (recording under incandescent
lamp) [
]
3) Outdoor Mode [
]
4) The white balance setting that was previously set
manually [
]
 To Resume Automatic Adjustment
Move the Joystick Control [◄] or [►] until the
[
] Indication appears. Or, set the [AUTO/
MANUAL/FOCUS] Switch to [AUTO].
Adjusting White Balance Manually
White Balance Adjustment recognizes the color
of light and adjusts so that white will appear pure
white. The Camcorder determines the hue of light
that comes through the Lens and White Balance
Sensor, thereby judging the recording condition, and
selects the closest hue setting. This function is called
Automatic White Balance Adjustment.
For light outside the functional Auto White Balance
Adjustment range, use the Manual White Balance
Adjustment Mode.
• Set to Tape/Card Recording Mode.
1 Set the [AUTO/MANUAL/FOCUS] Switch to
[MANUAL].