With a PC
59
Operating environment
Install the USB Driver first before connecting the
Camcorder to your PC with the USB Cable.
• When DirectX9.0b is installed, applications
supported by previous versions of DirectX may not
run. In this case, consult the manufacturers of the
disabled applications.
• If DirectX 9.0b is not already installed, it must be
installed on your PC.
PV-GS69 Only
• Despite having the Operating environment
indicated, it may not be possible to use the program
with some types of personal computers.
• When you connect to an USB 2.0 interface board,
use a certified board with the USB 2.0 (HI-SPEED
USB) logo.
Installing the USB Driver
1 Turn on the personal computer and start
up Windows.
[PV-GS69: Supplied]
2 Insert the CD-ROM into the personal
computer’s CD-ROM drive.
• Quit all applications.
• The [Setup Menu] Screen appears.
3 Click the [USB Driver].
• The set up program starts running.
4 For Windows XP users:
Depending on your system environment,
installation of “DirectX9.0b” may be
required. Click [Yes] and continue with
installation.
• After “DirectX9.0b” is installed, the computer
will restart.
• Do not remove the CD-ROM.
For Windows
OS:
1
Function:
IBM PC/AT compatible personal computer with
pre-installed:
Microsoft Windows XP Professional/Home Edition
Microsoft Windows 2000
• The USB equipment operates with the driver
installed standard on your OS.
2
Function:
• This is the Operating environment for the USB
Driver which can be installed from the supplied
CD-ROM (PV-GS69) or the Web Site (PV-GS39).
IBM PC/AT compatible personal computer with
pre-installed:
Microsoft Windows XP Professional/Home Edition
SP1 (PV-GS69) / SP2 (PV-GS39) or later
Microsoft Windows 2000 SP4 or later
(PV-GS39 Only)
• For Windows 2000 users:
Please download and install the USB Driver from
the Web Site.
• For Windows XP SP2 users:
The USB equipment operates with the driver
installed standard on your OS.
(PV-GS69 Only)
• You’ll need to install the USB Driver from the
supplied CD-ROM.
CPU:
Intel Pentium ll 300 MHz or higher
(including compatible CPU)
RAM:
32 MB or more (64 MB or more recommended)
Free hard disk space:
At least 30 MB or more
Interface:
USB 1.1 or more - A Type
For Macintosh
OS:
Mac OS X v 10.1 – X v 10.4
(Function
1
Only)
CPU:
Power PC G3 (400 MHz or higher), G4, G5
RAM:
64 MB or more
• The USB equipment operates with the driver
installed standard on your OS.
5 Finish installation by following the
on-screen instructions.
• Click [Next] and proceed with installation.
• After completing the installation, click [Finish].
6 Click [Finish] if the [InstallShiled Wizard]
dialog appears.
• Do not remove the CD-ROM.
To Next Page
Loading...
