Panasonic DMC-FX33 - Page 18

Preparation
18
VQT1K01
• The status indicator lights while the LCD
monitor is turned off. Press any button to
turn on the LCD monitor again.
•
The power save setting time is set to [2 MIN.].
[However, in the intelligent auto mode [ ], it
is set to [5 MIN.], and when the AC adapter
(DMW-AC5G; optional) is used, the power
save function does not work.]
• The brightness of the LCD monitor is not
reduced in Power LCD mode and high
angle mode.
• Economy mode is not activated in the
following cases.
– In clipboard mode [ ]
– When using the AC adaptor
(DMW-AC5G; optional)
– While a menu screen is displayed
– While the self-timer is set
– While recording motion pictures
[WORLD TIME] (P54)
Press [ ] to display the [SETUP] menu
and select the item to set. (P15)
Set the time in your home area and travel
destination.
[MONITOR]
Press [ ] to display the [SETUP] menu
and select the item to set. (P15)
Adjust the brightness of the LCD monitor in
7 steps.
[GUIDE LINE]
Press [ ] to display the [SETUP] menu
and select the item to set. (P15)
Set the pattern of the guide lines displayed
when taking pictures. (P31, 32)
You can also set whether or not to have the
recording information and histogram
displayed when the guide lines are
displayed.
• It is not possible to set the guidelines
display in the clipboard mode [ ].
[TRAVEL DATE] (P52)
Press [ ] to display the [SETUP] menu
and select the item to set. (P15)
Set the departure date and the return date
of the vacation.
[SET], [OFF]
[BEEP]
Press [ ] to display the [SETUP] menu
and select the item to set. (P15)
This allows you to set the beep.
[SHUTTER]
Press [ ] to display the [SETUP] menu
and select the item to set. (P15)
This allows you to set the shutter sound.
[VOLUME]
Press [ ] to display the [SETUP] menu
and select the item to set. (P15)
The volume of speakers can be adjusted in
7 steps from level 6 to 0.
• When you connect the camera to a TV,
the volume of the TV speakers does not
change.
[NO.RESET]
Press [ ] to display the [SETUP] menu
and select the item to set. (P15)
Reset the file number of the next recording
to 0001.
• The folder number is updated and the file
number starts from 0001. (P94)
• A folder number between 100 and 999
can be assigned.
[]: Travel destination area
[]: Your home area
[REC. INFO.]: [ON]/[OFF]
[HISTOGRAM]: [ON]/[OFF]
[PATTERN]: [ ]/[ ]
/SET
MENU
/SET
MENU
/SET
MENU
[BEEP LEVEL]
[]: No operation sound
[]: Soft operation sound
[]: Loud operation sound
[BEEP TONE]: //
[SHUTTER VOL.]
[]: No shutter sound
[]: Soft shutter sound
[]: Loud shutter sound
[SHUTTER TONE]: //
/SET
MENU
/SET
MENU
1 2 3
/SET
MENU
1 2 3
/SET
MENU
/SET
MENU