Advanced (Playback)
90
VQT1K01
[CANNOT BE SET ON THIS PICTURE]
is displayed on the screen.
3 Press 2/1 to determine the
horizontal position and press the
shutter button to set.
•Use 3/4 to set the frame position for
pictures rotated vertically.
• The message [DELETE ORIGINAL
PICTURE?] appears.
4 Press 3/4 to select [YES] or
[NO] and then press [MENU/SET].
• The picture is overwritten when you
select [YES]. If you convert the aspect
ratio of a picture and then overwrite it,
you cannot restore it.
• A picture with the converted aspect
ratio is newly created when you select
[NO].
• When the original picture is protected,
you cannot overwrite it. Select [NO] and
newly create a picture with the
converted aspect ratio.
5 Press [MENU/SET] twice to close
the menu.
• After converting the aspect ratio, the
picture size may become larger than that
of the original picture.
• Files that do not conform to the DCF
standard cannot be converted.
• You may not be able to convert pictures
taken on other equipment.
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P75)
You can copy data of pictures you have
shot from the built-in memory onto a card,
from a card into the built-in memory or from
a card into the dedicated clipboard folder.
1 Press 3/4 to select the copy
destination and then press
[MENU/SET].
•:
All the picture data in the built-in
memory are copied onto the card at
one time. > step
3.
•:
One picture at a time is copied from the
card to the built-in memory. > step
2.
•
The images are copied from the card to
the dedicated clipboard folder (built-in
memory) one at a time. (Motion pictures
cannot be copied.) > Step
2.
2 Press 2/1 to select the picture
and then press 4.
(Only when selecting [ ],
[])
3 Press 3 to select [YES] and then
press [MENU/SET].
/SET
MENU
[COPY]
Copying the picture data
/SET
MENU
/SET
MENU
To Next Page
Loading...
