Panasonic DMC-FX33 - [Pet]; [Sunset]

Advanced (Recording pictures)
46
VQT1K01
– Name:
For details on how to enter
characters, read the [TITLE EDIT]
section on P81.
• When the birthday or name is set,
[AGE] or [NAME] is automatically set
to [ON].
∫ Display the age/name
1 Press 3/4
to select [AGE] or [NAME]
and then press
1.
2 Press 3/4 to select [ON] and then
press [MENU/SET].
• If [ON] is selected when the birthday
or name has not been registered, the
setting screen appears automatically.
• If [AGE] or [NAME] is set to [OFF]
even when the birthday or name
has been set, the age or name will
not be displayed. Before taking
pictures, set [AGE] or [NAME] to
[ON].
• The focus range becomes the same as
macro mode. [5 cm (Wide)/30 cm (Tele) to
¶]
• [INTELLIGENT ISO] is activated, and
maximum ISO sensitivity level becomes
[ISO400], in [BABY1]/[BABY2].
• If the camera is turned on with [BABY1]/
[BABY2] set, the age and name are
displayed at the lower left of the screen for
about 5 seconds, along with the current
date and time.
•
The age display style differs depending on
the language setting in the recording mode.
• If the age is not properly displayed, check
the clock and birthday settings.
• The birthday setting and name setting can
be reset with [RESET].
• You cannot use the following functions.
– [D.ZOOM]
– [SLOW SHUTTER]
• The initial setting for [AF MODE] is [ ].
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P42)
Select this when you want to take pictures
of a pet such as a dog or a cat.
You can set your pet’s birthday and name.
You can select to have these appear at the
time of playback, or have them stamped on
the recorded image using [TEXT STAMP]
(P83).
• The age of the pet can be printed out
using the [LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] software on
the CD-ROM (supplied). To print out the
pet’s name, use
[PHOTOfunSTUDIO-viewer-]. [For details
on printing, refer to the operating
instructions (PDF file) of the software.]
For information about [AGE] or [NAME],
refer to [BABY1]/[BABY2] on P45.
• The initial setting for the AF assist lamp is
[OFF]. (P65)
• Years prior to 2000 cannot be selected for
the [AGE] setting.
• [INTELLIGENT ISO] is activated, and
maximum ISO sensitivity level becomes
[ISO800], in [PET].
• The initial setting for the AF mode is [ ].
• Refer to [BABY1]/[BABY2] for other
information about this mode.
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P42)
Select this when you want to take pictures
of sunset view. This allows you to take vivid
pictures of the red colour of the sun.
• The flash setting is fixed to Forced OFF
[].
[PET]
[SUNSET]
/SET
MENU
/SET
MENU