Advanced (Playback)
79
VQT1K01
∫ Recording a slide show
If you record a category slide show, you
can play it back by selecting [ ] in
[SLIDE SHOW] on page 76.
1 Press 4 to select
[SLIDESHOW
SETUP]
and then press
[MENU/
SET].
2 Press 3 to select [YES] and then
press [MENU/SET].
• You can only record one category slide
show on one card. If a category slide
show has already been recorded, the
message [A CATEGORY SLIDESHOW
ALREADY EXISTS. OVERWRITE?]
appears.
• If there are 1000 or more pictures, you
can make a slide show with up to 999
pictures.
3 Press 2 to return to the category
playback screen.
•Press [ ]
and then press [
MENU/SET]
to close the menu.
• You cannot play back motion pictures as a
slide show.
• Still pictures created from a motion picture
(P74) cannot be played back from the
motion pictures category in category
playback.
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P75)
This mode allows you to automatically
display pictures vertically if they were
recorded holding the camera vertically or
rotate pictures manually in 90° steps.
∫ Rotate display
(The picture is automatically rotated and
displayed.)
1 Press 4 to select [ON] and then
press [MENU/SET].
• The pictures are displayed without
being rotated when you select [OFF].
• Refer to P28 for information about how
to play back pictures.
2 Press [MENU/SET] to close the
menu.
∫ Rotate
(The picture is rotated manually.)
1 Press 2/1 to select the picture
and then press 4.
• The [ROTATE] function is disabled
when [ROTATE DISP.] is set to [OFF].
• Motion pictures and protected pictures
cannot be rotated.
/SET
MENU
/SET
MENU
[ROTATE DISP.]/[ROTATE]
To display the picture rotated
/SET
MENU
/SET
MENU
To Next Page
Loading...
