Advanced (Playback)
87
VQT1K01
∫ Single setting
1 Press 2/1 to select the picture
and then press 4 to SET/
CANCEL.
2 Press [MENU/SET] twice to close
the menu.
∫ Multi setting/To cancel all settings
Perform the same operation as in
“[DPOF PRINT]”. (P85 to 86)
• If you press [MENU/SET] while cancelling
protection, the cancelling will stop halfway.
• The protect setting may not be effective
on other equipment.
• If you want to delete protected pictures,
cancel their protection.
•
Even if you protect pictures in the built-in
memory or a card, they will be deleted if the
built-in memory or the card is formatted.
•
Even if you do not protect pictures on an SD
Memory Card or an SDHC Memory Card,
they cannot be deleted when the card’s
Write-Protect switch
B
is set to [LOCK].
• The following functions cannot be used
with protected pictures.
–[ROTATE]
– [AUDIO DUB.]
– [TITLE EDIT]
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P75)
You can add the audio after taking a
picture.
1 Press 2/1 to select the picture
and then press 4 to start audio
recording.
• The message [OVERWRITE AUDIO
DATA?] screen appears when audio has
already been recorded. Press 3 to
select [YES] and then press [MENU/
SET] to start audio recording. (The
original audio is overwritten.)
• Audio dubbing cannot be used with the
following pictures.
– Motion pictures
– Protected pictures
2 Press 4 to stop recording.
• The audio recording stops
automatically if 4 is not pressed after
about 10 seconds.
3 Press [MENU/SET] twice to close
the menu.
• Audio dubbing may not work properly on
pictures recorded by other equipment.
[SET]
The protect icon [ ] A
appears.
[CANCEL]
The protect icon [ ] A
disappears.
A
2
[AUDIO DUB.]
Adding audio after taking pictures
/SET
MENU
To Next Page
Loading...
