Panasonic DMC-FX33 - Using the [PLAY] mode menu

Advanced (Playback)
75
VQT1K01
• You can move forward frame-by-frame
by pressing 3/4/2/1.
3/4: Move forward/backward 3 frames
at a time.
2/1: Move forward/backward 1 frame
at a time.
3 Press the shutter button.
• The message [SAVE THESE NINE
PICTURES AS ONE SINGLE
PICTURE ?] appears. Also, the
message [SAVE AS A SINGLE
PICTURE ?] appears if you saved the
picture in step
2.
4 Press 3 to select [YES] and then
press [MENU/SET].
• The nine pictures are saved as one
single picture.
∫ To stop using the 9 screens playback
screen
After the 9 screens playback screen is
displayed, rotate the zoom lever several
times towards [ ] (T) or press [MENU/
SET]. The screen returns to the paused
motion picture playback screen.
∫ Picture size
• [QUALITY] is fixed to [ ].
• You may not be able to save still pictures
from a motion picture taken on other
equipment.
Using the [PLAY] mode
menu
You can use various functions in playback
mode to rotate pictures, set protection for
them etc.
1 Press [MENU/SET].
2 Press 3/4 to select the menu
item and then press 1.
• Press 4 at A to switch to the next
menu screen.
• You can switch menu screens from any
menu item by rotating the zoom lever.
• After performing steps
1 and 2, refer
to the description of the menu item
in the operating instructions and
then set it.
Item 1picture 9pictures
[30fpsVGA]
0.3 M 2 M
[10fpsVGA]
0.3 M 2 M
[30fpsQVGA]
0.3 M 1 M
[10fpsQVGA]
0.3 M 1 M
[30fps16:9]
2M 2M
[10fps16:9]
2M 2M
/SET
MENU
A