Panasonic DMC-FX33 - [Party]; [Candle Light]; [Baby1];[Baby2]

Advanced (Recording pictures)
45
VQT1K01
This mode allows you to take pictures of
food with a natural hue without being
affected by the ambient light in restaurants
etc.
• The focus range becomes the same as
macro mode. [5 cm (Wide)/30 cm (Tele) to
¶]
• The white balance cannot be set.
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P42)
Select this when you want to take pictures
at a wedding reception, an indoor party etc.
This allows you to take pictures of people
and the background with near real-life
brightness.
∫ Technique for Party mode
• Use the flash.
• We recommend using a tripod and the
self-timer for taking pictures.
• We recommend rotating the zoom lever to
Wide (1k) and being about 1.5 m from the
subject when taking pictures.
• The flash setting can be set to Slow sync./
Red-eye reduction [ ] or Forced ON/
Red-eye reduction [ ].
• The white balance cannot be set.
• The initial setting for [AF MODE] is [ ].
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P42)
This mode allows you to take pictures with
a candle-lit atmosphere.
∫ Technique for Candle light mode
• If you make the most of the candle light,
you can take successful pictures without
using the flash.
• We recommend using a tripod and the
self-timer for taking pictures.
• The focus range becomes the same as
macro mode. [5 cm (Wide)/30 cm (Tele) to
¶]
• The flash setting can be set to Slow sync./
Red-eye reduction [ ] or Forced ON/
Red-eye reduction [ ].
• The white balance cannot be set.
• The initial setting for [AF MODE] is [ ].
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P42)
This takes pictures of a baby with a healthy
complexion. When you use the flash, the
light from it is weaker than usual.
It is possible to set different birthdays and
names for [BABY1] and [BABY2]. You can
select to have these appear at the time of
playback, or have them stamped on the
recorded image using [TEXT STAMP] (P83).
• The age of the baby can be printed out using
the [LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] software on the
CD-ROM (supplied). To print out the baby’s
name, use [PHOTOfunSTUDIO-viewer-]. [For
details on printing, refer to the operating
instructions (PDF file) of the software.]
∫ Birthday/Name setting
1 Press 3/4
to select [AGE] or [NAME]
and then press
1.
2 Press 3/4 to select [SET] and then
press [MENU/SET].
3 Enter the birthday or name.
– Birthday:
2/1: Select the items (year/month/
day).
3/4:Setting.
[MENU/SET]: Exit.
[PARTY]
[CANDLE LIGHT]
/SET
MENU
/SET
MENU
[BABY1]/[BABY2]
1
2
/SET
MENU