Basic
27
VQT1K01
∫ Entering the digital zoom range
The on-screen zoom indication may
momentarily stop moving when you rotate
the zoom lever to the extreme Tele position.
You can enter the digital zoom range by
continuously rotating the zoom lever to Tele
or releasing the zoom lever once and then
rotating it to Tele again.
(When using the digital zoom and the
extended optical zoom [ ] (3M EZ) at the
same time)
1 Optical zoom
2 Digital zoom
3 Extra optical zoom
• A big AF area (P62) is displayed when
using the digital zoom. Also, the stabilizer
function may not be effective.
• In digital zoom, the larger the picture the
lower the picture quality.
• When using the digital zoom, we
recommend using a tripod and the
self-timer (P38) for taking pictures.
• The indicated zoom magnification is an
approximation.
• The digital zoom does not work in the
following cases:
– In [SPORTS], [BABY1]/[BABY2], [PET],
[HIGH SENS.] and [HI-SPEED BURST]
in scene mode.
– When [INTELLIGENT ISO] is set to [ON]
Checking the
Recorded Picture
(Review)
You can check the recorded pictures while
still in [REC] mode.
1 Press 4 [REV].
• The last recorded picture appears for
about 10 seconds.
• Review is cancelled when the shutter
button is pressed halfway or the 4
[REV] is pressed again.
•
You can change the information displayed
during review by pressing [DISPLAY].
2 Press 2/1 to select the picture.
W
W
W
T
T
T
≥[OFF]:
≥[ON]:
2: Play back the previous picture
1: Play back the next picture
To Next Page
Loading...
