Panasonic DMC-FX33 - Format

Advanced (Playback)
91
VQT1K01
(The illustration shows the screen when
pictures are copied from the built-in
memory to a card.)
• If you press [MENU/SET] while copying
pictures from the built-in memory to the
card, the copying will stop halfway.
• Do not turn the camera off or perform
any other operations before copying is
finished. The data on the built-in
memory or the card may be damaged
or lost.
4 Press [MENU/SET] several times
to close the menu.
• If you copy from the built-in memory to
a card, all the pictures are copied and
then the screen automatically returns to
the playback screen.
• If you copy picture data from the built-in
memory to a card which does not have
sufficient free space, the picture data will
only be copied halfway. We recommend
using a card which has more free space
than the built-in memory (about 27 MB).
•I
f a picture exists with the same name
(folder number/file number) as the picture to
be copied in the copy destination when
[
] is selected, a new folder is
created and the picture is copied.
If a picture exists with the same name
(folder number/file number) as the picture
to be copied in the copy destination when
[ ] is selected, that picture is not
copied.
• It may take time to copy the picture data.
• Only pictures recorded with a Panasonic
digital camera (LUMIX) will be copied.
(Even if the pictures were recorded with a
Panasonic digital camera, you may not be
able to copy them if they were edited with
a PC.)
• DPOF settings on the original picture data
will not be copied. Set the DPOF settings
again after copying is finished. (P85)
• When copying clipboard pictures onto a
card, select [COPY] on the clipboard
playback menu. (P68)
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P75)
Usually, it is not necessary to format the
built-in memory and the card.
Format them when the message
[BUILT-IN MEMORY ERROR] or
[MEMORY CARD ERROR] appears.
Press 3 to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
the built-in memory is formatted.)
•
When a card is not inserted, you can
format the built-in memory. When a card
is inserted, you can format the card.
• If you press [MENU/SET] while
formatting the built-in memory, the
formatting will stop halfway. (However,
all the pictures will be deleted.)
• Formatting irretrievably deletes all the
data including clipboard pictures and
protected pictures. Check the data
carefully before formatting.
• If the card has been formatted on a PC or
other equipment, format it on the camera
again.
• Use a battery with sufficient battery power
or the AC adaptor (DMW-AC5G; optional)
when formatting.
/SET
MENU
[FORMAT]
Initializing the built-in memory or a
card
/SET
MENU
/SET
MENU