13. After [UNFORMAT] was displayed, message to request FORMAT
is displayed on TV screen.
14. Select [Yes] and press [ENTER] key to format HDD.
(After FORMAT, program in HDD will be lost, but Main firm will not be lost.
“Write of the main farm" is completed above.
* Drive firm is not updated by above operation. If you wish update Drive firm, please prepare the
disc for latest firmware update, and write it again.
* If the version of the firm you have prepared was same as or later than that has already been
written in deck, 'UNSUPPORT' is displayed on FL.
* In a usual updating of firmware, writing is not performed when the timer reservation standby
was not released.
72
To Next Page
Loading...
