10.3. (VHS) Take out Cassette
Tapemanually after removing
the mechanism
1. Disconnect the AC plug, and remove the Top Panel, Front
Panel and the Mechanism by referring to "14 Assembling
and Disassembling"
2. Remove the Screw and remove the Loading Motor as
shown below.
3. Rotate the Main Cam Gear counter-clockwise until just
before the unloading will be completed as shown below. .
4. Rotate the Capstan Motor clockwise to remove the slack
tape as shown below.
5. Rotate the Main Cam Gear counter-clockwise again to
remove the cassette-tape as shown below.
6. Attach Loading Motor and tighten the screw.
7. Set the Position Switch to EJECT POSITION certainly and
attach the mechanism to chassis as shown below.
15
DMR-ES30 VP / DMR-ES30 VPC
To Next Page
Loading...
