17 (Power P.C.B.) Caution after replacing parts
18 (DVD) Caution after parts replacing parts
18.1. (DVD) After replacing the RAM Drive with new one
18.2. (DVD) When the unit does not operate normally after replacing the
Timer Microprocessor or Main P.C.B.
When the unit does not operate normally after replacing the Timer Microprocessor or Main P.C.B. with new one, reset Timer
Microprocessor.
Step Operation Descriptions
1 While power is ON, short IC37508-4 pin (RESET-OUT) and the GND
momentarily.
“RESET (L)” is transmitted to the XRESET terminal of
Timer Microprocessor (IC37501-11 pin), then the unit
operates normally.
45
DMR-ES30 VP / DMR-ES30 VPC
To Next Page
Loading...
