Error
Code
Diagnosis contents Description Monitor Display Automatic FL display
UNFORM
AT
The disc is not formatted You have inserted an unformatted DVD-RAM
or DVD-RW that is unformatted or recorded
on other equipment.
F60 DVD module has not been
started.
Defect of Digital P.C.B.
Mode: No change
No display
12.2. (DVD) Special Modes Setting
Item FL display Key operation
Mode name Description Front Key
TEST Mode *All the main unit´s parameters (include tuner)
are initialized.
Then VHS Microproccesor is initialized to
shipping setting too.
Press [VHS to DVD DUBBING],
[OPEN/CLOSE] and [(DVD) REC]
keys simultaneously for 5 seconds
when power is off.
Service Mode Setting every kind of modes for servicing.
*Details are described in “12.3. (DVD)
Service Mode”.
When the power is off, press [VHS
to DVD DUBBING], [(DVD) STOP]
and [OPEN/CLOSE] keys
simultaneously for 5 seconds.
Rating password The audiovisual level setting password is
initialized to “Level 8”.
While the tray is open, press [(DVD)
REC] and [(DVD) PLAY]
simultaneously for 5 seconds.
Forced disc eject Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
*When Timer REC is ON or EXT-LINK is ON,
execute " Forced disc eject " after releasing
Timer REC or EXT-LINK.
*This command is not effective during “Child
lock” is ON.
The display before execution
leaves.
When the power is off, press [(DVD)
STOP] and [(DVD) CH UP] keys
simultaneously for 5 seconds.
Forced power- off When the power button is not effective while
power is ON, turn off the power forcibly.
*When Timer REC is ON or EXT-LINK is ON,
execute “Forced Power- off” after releasing
Timer REC.
Action:
The tray will open, and the power will turn off.
Display in P-off mode. Press [Power] key over than 10
seconds.
Aging Perform sequence of modes as * Aging
Description shown below continually.
Display following the then mode. When the power is ON, press
[(DVD) CH DOWN], [VHS to DVD
DUBBING] and [OPEN / CLOSE]
simultaneously for over 5 seconds
and less than 10 seconds.
*When the unit has hung-up
because of pressing keys for over
10 seconds, once turn off the
power, and re-execute this
command.
“When releasing Aging mode, press
[POWER] key.
Aging Contents (Example):
20
DMR-ES30 VP / DMR-ES30 VPC
To Next Page
Loading...
