Panasonic DMR-ES30VP - Digital I;F P.C.B

2. Disconnect FFC.
3. Remove Screw (B).
4. Unlock Clamper (A), pay attention to Connector (A), and
pull out Digital P.C.B. to disconnect Connector (A).
CAUTION 1:
When replacing Digital P.C.B., pay attention to inserting
FFC.
CAUTION 2:
When attaching Digital P.C.B. on to Earth Angle, Earth
Angle should be touched to DVD angle as shown below.
14.12. Digital I/F P.C.B.
1. Remove Fan Motor (refer to 14.7.2.1.).
2. Disconnect 4 Connectors (A) and 2 Connectors (B).
3. Remove the 5 screws.
4. Remove Digital I/F P.C.B.
38
DMR-ES30 VP / DMR-ES30 VPC