1. Disconnect Connector (A).
2. Remove 2 Screws (A), loosen 2 Screws (B) and remove
Power Shield Case.
3. Remove 2 Screws (C) and unlock 2 locking Tabs (A) to
remove Power P.C.B.
14.7.2. Rear Panel with Fan Motor
1. After removing Power Unit as shown above, disconnect Fan
Connector.
2. Remove 4 Screws (A) and 1 Screw (B).
3. Unlock 2 Locking Tabs (A) to remove Rear Panel with Fan
Motor.
14.7.2.1. Only Fan Motor
1. Disconnect Fan Connector.
2. Remove 2 Screws (A) to Remove Fan Motor.
35
DMR-ES30 VP / DMR-ES30 VPC
To Next Page
Loading...
