17
E
18
64
66
HDMI IN
HDMI OUT
HDMI IN
18
Connection with HDMI cable
Connection to an amplifier
Amplifier
Television set
DVD Recorder
Control via HDMI (HDAVI Control)
If you connect this unit with an HDMI cable to a Panasonic television set with HDAVI
control function, then both units can be controlled. After connecting up the unit,
switch in the [Setup] menu [Control with HDMI / Q Link] to [HDMI and Q Link].
!
Once an HDAVI Control compatible unit has been connected to the HDMI AV OUT
connection, switch the units on and automatically selects the input channel for the
DVD Recorder. Repeat the procedure if there is any change to the HDMI AV OUT
connection.
Automatic input changeover (Easy Playback)
If you start the playback function or select a menu (e.g. Direct Navigator, Timer
Recording), the external unit automatically switches to the input channel for the
DVD Recorder.
If you are recording on the DVD drive, the external unit does not automatically
change to the input channel.
Power on link
If you start the playback function or e.g. select the menu Direct Navigator or Timer
Recording, the television set switches on.
If you are recording on the DVD drive, the external unit does not automatically
change to the input channel.
Power off link
If the television set is switched off, this unit automatically switches off as well. The
unit also switches off while the menu FUNCTIONS, DISPLAY or status messages are
being displayed, and even when a Timer-controlled recording has been programmed
or during playback.
The unit does not switch off during a recording with the REC button, the Copying
function or while a disc is being finalized.
An external unit takes a certain time to change
over the input channel for the DVD Recorder
automatically. It is therefore possible that the
television set does not display the playback at
the start of the title. Press SKIP or
SLOW/SEARCH to return to the start of
the playback.
Power on link
Power off link
Easy Playback
Download from TV
Direct TV recording
Q Link Function:
(not via HDMI)
HDMI and Q Link
only Q Link (via AV1)
only HDMI
(High Definition Multimedia Interface)
If you connect the DVD Recorder to an HDMI-compatible unit, just one cable
transfers a high quality digital audio and video signal without interference.
The audio signal cannot be transmitted via HDMI if an externally connected unit does
not support CPPM (Content Protection for Prerecorded Media), or when playing
a DVD audio with copy protection. In this case, use an audio cable.
If an connected TV only supports dual-channel audio, then an audio signal with 3 or
more channels is down-converted, with output through 2 audio channels.
It is not always possible to down-convert all discs.
Titles where down-converting is not possible can only be reproduced via HDMI
through an amplifier which corresponds to the HDMI Ver. 1.1 standard or higher
and is CPPM compatible.
For HDCP (High-Bandwidth Digital Content Protection) compatible units with DVI
(Digital Visual Interface) connection (e.g. PC monitors): depending on the unit, it is
possible that a DVI/HDMI adapter does not reproduce the video signal perfectly. The
audio signal is not transmitted in this case.
To Next Page
Loading...
