6
Remote Control
Point the remote control at the unit’s sensor. Avoid obstacles in the path of the
transmission. The maximum range of the remote control is 7 m directly in front of the
unit. Keep the transmission window and the unit sensor clean. The procedure can be
impaired by direct sunlight or doors of glass cabinets.
Child lock
You can lock the buttons of the unit and the remote control.
!
Press and hold RETURN and ENTER until appears in the display.
The unit is now locked.
!
To unlock the child lock, repeat the procedure until disappears.
Operating a television set
Change the remote control code to operate your television set.
!
Press and hold the TV on and off switch button.
!
Enter the two-digit code for your television set.
The input must be repeated after batteries are changed.
X HOLD
X HOLD
Trademark Code
Panasonic 01-04,45
AIWA 35
AKAI 27,30
BLAUPUNKT 09
BRANDT 10,15
BUSH 05,06
CURTIS 31
DESMET 05,31,33
DUAL 05,06
ELEMIS 31
FERGUSON 10
GOLDSTAR/LG 31
Trademark Code
SANYO 21
SBR 06
SCHNEIDER 05,06,29-31
SELECO 06,25
SHARP 18
SIEMENS 09
SINUDYNE 05,06,33
SONY 08
TELEFUNKEN 10-14
THOMSON 10,15,44
TOSHIBA 16
WHITE WESTINGHOUSE 05,06
Trademark Code
NOKIA 25-27
NORDMENDE 10
ORION 37
PHILIPS 05,06
PHONOLA 31,33
PIONEER 38
PYE 05,06
RADIOLA 05,06
SABA 10
SALORA 26
SAMSUNG 31,32,43
SANSUI 05,31,33
Trademark Code
GOODMANS 05,06,31
GRUNDIG 09
HITACHI 22,23,31,40-42
INNO HIT 34
IRRADIO 30
ITT 25
JVC 17,39
LOEWE 07
METZ 28,31
MITSUBISHI 06,19,20
MIVAR 24
NEC 36
Some television models of the brands listed above, (e.g. older Panasonic units),
cannot be operated using the remote control.
Setting the remote control
If you use another Panasonic unit at the same location, change the mode
of the remote control so that you can operate the units independently of each other.
Switching to AV input on your Panasonic television
!
Press AV.
Switches between TV reception and AV input each time the button is pressed.
Apply the selected setting [DVD 1, 2 or 3] to the remote control.
!
Press and hold ENTER and press the appropriate number button 1, 2 or 3 for at
least 2 seconds.
!
Exit the menu with RETURN.
Set up the remote control for the unit.
!
Press FUNCTIONS.
!
Select [To Others] with and confirm with ENTER.
!
Select [Setup] with and confirm with ENTER.
!
Select [Others] with , [Remote Control] with and confirm with ENTER.
!
Select [DVD 1, 2 or 3] with and confirm with ENTER.
If the remote control setting does not match that of the unit, [DVD 1, 2 or 3] appears
on the unit’s display.
!
Press ENTER and press the appropriate number key 1, 2 or 3 simultaneously for
at least 2 seconds.
If you want to operate two units independently of each other using the same
remote control, then change the the remote control setting.
Setup
Remote Control
Clock
DVD 1
System Update
Initialize
Disc
Picture
Sound
Display
Connection
Tuning
Others
Off
Power Save
On
Quick Start
DivX Registration
TAB
SELECT
RETURN
DVD 1
Remote Control
DVD 2
DVD 3
ENTER
RETURN
SELECT
Remote control
signal sensor
To Next Page
Loading...
