FUNCTIONS
60
Tuning
Auto-Setup Restart
ENTER
Tuning
Add New DVB Services
ENTER
Tuning
Signal Condition
ENTER
Tuning
Edit Profiles
ENTER
Add New DVB Services
The unit searches for new digital stations.
The station search begins automatically.
The bar over the table shows you the search progress. At the end of the search,
the number of found new digital stations appears.
!
Press RETURN to stop the station search prematurely.
The channels found before stopping are not saved.
Creating new profiles
You can find the description of this setting on page 20.
SETUP
Setup
FUNCTIONS
Tuning
Download from TV
ENTER
73
Setup
Edit Profiles
Digital
Analogue
Download from TV
Manual
Signal Condition
Auto-Setup Restart
Add New DVB Services
Tuning
Disc
Picture
Sound
Display
Connection
Others
TAB
SELECT
RETURN
ENTER
Yes
No
Auto-Setup Restart
Warning--all stored tuning data
will be lost !
Do you want to proceed ?
Signal Quality
0
10
Signal Strength
0
10
DVB CH23
RETURN
CH +
CH –
Yes
No
Download from TV
Warning--all currently
stored stations will be
replaced by new ones !!
To Others
Please wait !
Ch 5
69
Prog.
Net ID
TS ID
Quality
Channel Service Name
RETURN
ENTER
45 new services found.
Add New DVB Services
1 23 ZDF 12302 12289 9
2 23 Info/3sat 12302 12289 9
3 23 Doku/KiKa 12302 12289 9
4 23 RTL Television 12305 11397 9
5 23 RTL2 12305 11397 9
1 ZDF
Setup menu overview
!
Press FUNCTIONS.
!
Select [To Others] with and confirm with ENTER.
!
Select [Setup] with and confirm with ENTER.
!
Select the desired sub menu with and switch to setup with .
!
Select the desired setting with and confirm with ENTER.
!
Select the desired option with and confirm with ENTER.
Follow the menu guide. The unit saves your settings.
!
Press RETURN multiple times to exit the menus.
Auto-Setup Restart
!
Select [Yes] with and confirm with ENTER. The station search begins.
!
To cancel the process, select [No] with and confirm with ENTER or press RETURN.
!
Press RETURN to prematurely end the station search.
!
Press RETURN to prematurely end the station search. All station settings and all
created profiles are deleted.
Signal Condition
The display in the [Signal Condition] menu shows the quality and strength of
the selected digital station.
You can select and check the stations consecutively with CH .
The signal condition is only displayed for digital stations.
Signal Quality
Display red: signal quality below 2: the signal quality is poor so that there may be
interference in the pictures and sound.
Display orange; signal quality 2-5: the signal quality is basically adequate, but brief
interference in the pictures and sound is possible in isolated cases.
Display green; signal quality over 5: optimum picture and sound quality.
Signal Strength
The display for signal strength is grey. 0 means signal strength = 0 %, 10 means
signal strength = 100%.
The signal strength can also be > 100 % (> 10). In this case, the display is red.
!
Download from TV (with Q Link or similar functions)
!
Select [Yes] with and confirm with ENTER. Data transfer begins.
!
To cancel the procedure, use to select [No] and confirm with ENTER or press
RETURN.
!
To prematurely end the data transfer, press RETURN.
To Next Page
Loading...
