FUNCTIONS
VPS
FUNCTIONS
To Others
PROG/CHECK
DVD
HDD
Please set Channel.
ENTER
RETURN
Change
Profile
Programme Name
HDD
All Services : ----
Timer
Recording
--/- - - -
- -:- -
- -:- -
SP
Number
0
9
- - - -
RAM
HDD
99
33
9950
46
VPS
ENTER
RETURN
HDD
Timer
Recording
Delete
Name Date Start Stop DVD Mode
Remain HDD 36:40 SP DVD 1:30 SP
9:40:23 6. 3. THU
VPS
ENTER
RETURN
HDD
Delete
Press ENTER to input a programme name.
RENEW
Programme Name
Name Date Start Stop DVD Mode
Remain HDD 36:40 SP DVD 1:30 SP
9:40:23 6. 3. THU
Name Date Start Stop DVD Mode
All Services : ZDF
heute
Programme Name
Press ENTER to input a programme name.
Timer Recording
All Services : ZDF
heute
3 Euros MON-FRI 14:00 16:00 HDD SP ON
3 Euros 11. 3. SAT 14:00 16:00 DVD SP
Manual programming
Name : Select the programme position/name of the TV station with .
Date : One-time, daily or weekly programming.
Start/Stop : Start time/end of recording. If you press and hold the buttons,
the time increases/decreases in 30-minute intervals. You can also use
the number buttons for these entries.
!
Press FUNCTIONS.
!
!
Select [To Others] with and confirm with ENTER.
Confirm [Timer Recording] with ENTER.
The Timer Recording screen appears.
!
Confirm [New Timer Programme] with ENTER.
!
Switch to the next entry with and change the setting with .
The recorded titles can only be copied in High Speed Mode later on if the titles
were originally recorded in High Speed Mode on HDD.
HDD/DVD : Select the drive.
Mode : Recording mode XP, LP, EP, SP, FR.
RENEW : [On]: For HDD, the date is set to daily or e.g. [MON - SAT].
The old recording is overwritten with the new recording.
[Off]: The recordings take place continuously.
If you programmed the timer programmes one after the other in sequential
order, the first few seconds of the second Timer Recording are not recorded.
With other types of discs, it is approx. 30 seconds.
!
After you have made your changes, save the programming with ENTER.
!
To enter other programmes, select [New Timer Programme].
A Timer Recording does not start while a disc is being formatted, deleted or finalized.
The recording begins afterwards.
!
To enter the title of the recording, select [Programme Name] with and confirm
with ENTER.
!
Enter the desired name in the Programme Name menu.
!
Press STOP to apply the name.
If you receive your TV programme via a satellite receiver (digital/analogue):
On the external unit, select the station with the programme that you want to record.
The station must not be changed during the recording.
The programme on the set station is always recorded.
Name: Select [AV2] as the name of the TV station with .
Storage space (DVD/HDD)
OK: There is enough storage space available on the disc for the recording.
(Date): For recordings that are made daily or weekly, the display indicates
whether there is enough storage space on the disc.
! : The disc was not inserted, it is write-protected or there is insufficient storage
space available.
Relief: Backup recording.
Relief Recording
The unit automatically switches over to HDD if the selected DVD does not have
sufficient storage space for the programmed recording.
Change Profile
To change the station name manually, you can select the station from the preset
categories and profiles.
!
Press the BLUE button in the Name box to see the first station of the
corresponding category or preset profile.
!
Select the required station with and press ENTER to confirm.
To Next Page
Loading...
