FUNCTIONS
RETURN
SELECT
Set rec. time
Flexible Rec
Record in FR mode.
Maximum rec. time
7 Hour 51 Min.
7 Hour 51 Min.
Start
Cancel
FUNCTIONS
Flexible Rec
DVD
HDD
59
FUNCTIONS
To Others
DV Auto Rec
RETURN
SELECT
Remain
DV Auto Rec
Start DV automatic recording ?
Model of DV
Panasonic
NV-DX100
3:50 (LP)
Rec
Cancel
ENTER
DVD-RAM
DV
L R
DV AUTO REC
!
!
Select with [Rec to HDD] for recording to HDD or [Rec to DVD] for recording
to DVD.
!
Select with [Recording] and confirm with ENTER. Recording begins.
Connect your Camcorder to the DV IN input of the DVD Recorder with a DV cable.
The DVD Recorder automatically detects the Camcorder.
RAM
-R +R
-RW(V)
+RW
HDD
RAM
-R +R
-RW(V)
+RW
HDD
RAM
HDD
HDD
RAM
-R +R
-RW(V)
+RW
29
DV IN
DV cable
To Others
Flexible recording mode (FR)
The unit calculates the best possible recording quality
between XP and EP. It is adjusted for the space available on the disc.
This function is not available during an EXT LINK recording.
!
Select the station with CH or the number buttons.
!
Press FUNCTIONS.
!
Select [To Others] with and confirm with ENTER.
!
Select [Flexible Rec] with and confirm with ENTER.
!
Select [Hour] or [Min.] with and change the recording time with .
!
Go back to [Set rec. time] with .
!
Select [Start] with , and confirm with ENTER. Recording begins.
!
Press STOP to cancel the recording before it has ended.
!
The channel and recording mode cannot be changed in PAUSE mode.
When a Timer Recording starts, recording in
FR mode is cancelled.
Displaying the available recording time
!
Press multiple times.
Recording via DV input
DV means Digital Video. Digital satellite tuners and digital VHS video recorders are
not compatible with this unit. The DVD recorder cannot be controlled using an
external unit connected to the DV IN terminal.
The programmes (e.g. via a digital video unit) are recorded as one title.
Each time the picture is interruped, a chapter is created and a playlist is
automatically created.
Switch off this unit and the DV unit (e.g. digital camcorder) before you connect it
to the DV terminal. If you are on the SD drive, select the DVD drive with
DRIVE SELECT.
!
In the Setup menu under Audio Mode for DV Input, select [Stereo 1/2] or [Mix].
!
Set the DV unit to Pause at the desired start position.
!
Press REC MODE to select the recording mode SP, LP, EP, XP.
!
Press FUNCTIONS.
!
Select [To Others] with and confirm with ENTER.
!
Select [DV Auto Rec] with and confirm with ENTER.
!
Confirm [Rec] with ENTER. Recording begins.
!
Confirm the message at the end of the recording with ENTER.
!
To prematurely stop the recording, press STOP . Confirm the message to
prematurely stop the recording with ENTER or RETURN.
This unit cannot be controlled from a
connected DV unit. The DV input of this unit is
only designed for DV units. (A computer etc.
cannot be displayed.) The name of the
DV unit may not be displayed correctly. Some
DV units do not enable proper input of
the picture and sound signal. The date and
time information on the tape in the DV
unit is not recorded. Simultaneous recording
and playback is not possible.
Manual recording via DV input
!
Start playback on your external DV unit.
!
Press Pause at the desired start position.
!
Select the DV channel with INPUT SELECT.
!
Select the recording mode with REC MODE.
!
Press REC on the DVD Recorder.
!
Start playback on the external DV unit.
!
End the recording on the DVD Recorder with STOP .
!
End playback on the DV unit.
Recording cannot be cancelled with PAUSE .
Titles recorded in FR mode on the hard disk are recorded in such a way that
they will fit exactly onto a 4.7 GB disc later on.
The title does not have to be edited when copying to the disc, or the recording mode
(XP-EP) does not need to be changed.
Automatic detection of a Camcorder at DV IN
Not all DV units are automatically detected. In this case, copy with the function
[DV Auto Rec] in the FUNCTIONS menu.
64
HDD RAM
To Next Page
Loading...
Need help?
General
