36
Laser power confirmation Drive state is judged based on difference
between laser power value at shipping and
present laser power value.
Measuring stars (Measuring in pro-
cess).
When the measuring result is OK.
When the measuring result is NG.
When DVD-RAM is not inserted.
When an error occurs while measur-
ing.
* is judgement result
If DVD-RAM disc in not inserted, [NO
DISC] is displayed.
If power value study was filed,
[ERROR] is displayed.
1. into
DVD Drive in service mode.
(Other media are assumed to
be non-correspondence.)
2. Press [4] [4].
CEC (H) output Check of the CEC terminal high output of
HDMI.
When the check is OK.
When the check is NG.
Press [5] [5] in service mode.
CEC (L) output Check of the CEC terminal low output of
HDMI.
When the check is OK.
When the check is NG.
Press [5] [6] in service mode.
Production Date Display Display the date when the unit was pro-
duced.
YY: Year
MM: Month
DD: Day
Press [6] [1] in service mode.
Item FL display Key operation
Mode name Description (Remote controller key)
To Next Page
Loading...
