37
Display the Error History Display the Error History stored on the unit.
* If the current date or the date when the
error occurred is wrong, correct judgement
may not be made.
When the drive malfunction was
detected within 4 weeks ago. (*)
When the drive malfunction was
detected more than 4 weeks ago or
Drive last error data does not exist.
When HDD Self-Diagnosis test result
is NG.
When HDD Self-Diagnosis test result
is OK.
The Error History is not Data for HDD
and DVD Drive.
The Error History is not Data.
HDD Self-Diagnosis test in process.
Press [6] [5] in service mode.
Tray OPEN/CLOSE Test The tray is opened and closed repeatedly.
ā*ā is number of open/close cycle
times.
Press [9] [1] in service mode
*When releasing this mode, press
the [POWER] button of Remote
Controller.
Delete the Laser Used
Time
Laser used time stored in the memory of the
unit is deleted.
Press [9] [5] in service mode.
Delete the Last Drive
Error
Delete the Last Drive Error information
stored on the DVD Drive.
Press [9] [6] in service mode.
Delete the Error History Delete Error History information stored on
the unit.
Press [9] [7] in service mode.
Error code initialization Initialization of the last error code held by
timer (Write in F00)
Press [9] [8] in service mode.
Initialize Service Last Drive Error, Error history and Error
Codes stored on the unit are initialized to
factory setting.
Press [9] [9] in service mode.
Item FL display Key operation
Mode name Description (Remote controller key)