Department Code
96
Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL" mode.
Sending Document with Department Code
1a
Place original(s) face up on the ADF.
or
1b
Place a book or an original face down on the Platen Glass.
2
Enter a Identification Code (Department Code) and press .
3
Dial by any combination of the following methods:
• Manual Number Dialing, press after each station is entered (up to 70
stations)
• Address Book Dialing (up to 200 stations)
Ex:
4
5
The document is sent with the header of the selected Department Name. The
selected Department Name is printed on the COMM. Journal and Individual
Transmission Journal.
OK
Input Identification Code
_
OK
PANASONIC
Memory Transmit STN(s):001
TO: PANASONIC
5551234
PANASONIC
QUALITY DEPT
To Next Page
Loading...
