Panasonic DVD-CV50

Basic Operations a
14
RQT5455
a ® + a)
! Sees ee
wn Stee ae a TES Lal
i
f
Basic play
A Stopping play
Press [E] during play.
èThe unit records the point where [W] was pressed during play.
(“[>" flashes on the unit's FL display.)
To resume play from where you stopped it
(RESUME function)
Press [P] while “©” is flashing on the FL display.
Play will resume from the point where [B] was pressed.
To clear the RESUME function
Press [W] again while “>” is flashing on the FL display.
eThe RESUME function works only with titles for which the elapsed
play time appears on the unit's FL display during play.
This feature remains active if the unit is switched to the standby
mode and then turned back ON.
C Chapter preview function -
DVD
This function plays the first few seconds of each chapter from the
beginning of the title up to the point where operation was stopped.
This makes it possible to review previous chapters.
1. Press [P ] while “>” is flashing on the FL display.
(The message illustrated is briefly displayed.)
2. Press [>] again while the message is displayed on the
screen.
Normal play will commence from the point where operation was
stopped.
e Canceling the RESUME function will also clear the chapter preview
function.
The chapter preview function may not work with some DVDs.
E After operation
When the unit is not in use, remove the discs and press [POWER
()/] to switch the unit to the standby mode.
The unit is automatically switched to the standby mode after
30 minutes or so have elapsed in the stop mode.
(Auto power-off function)
The disc in the play position continues to spin while the menu is
displayed even after the unit has finished playing a particular item,
Stop the unit when you finish viewing to preserve the unit's motor
and your television screen.