Panasonic DVD-CV50

A Connecting an amplifier with 5.1-channel audio input terminals
This unit can decode Dolby Digital. Connect an amplifier with 5.1-channel discrete input terminals to enjoy surround sound.
Back of the unit
Audio cable
Connect cables to terminals corresponding to the speakers you
have connected.
CENTER
SUB- SURROUND
WOOFER (L) (R) = {L) (R}
Amplifier with 5.1-channel audio input terminals
Read the instructions for the amplifier and speakers for
connection details.
Home Theater a
Speakers
{You can connect from 3 to 5 speakers including the front two.)
eFront speakers {L/R)
Center speaker
eSurround speakers (L/R}
Subwoofer
-
When you have finished connection
eIn “8 Speaker Setting’, select “1 Multi-channel’ and make changes to suit your speakers {(* page 42).
Speaker presence: Select “Yes” if the corresponding speaker is connected.
Select “No” if the corresponding speaker is not connected.
Center and surround speaker delay time: Adjust if you cannot place your speakers in the optimum position.
Channel balance: Adjust the output level of the speakers to make up for differences in volume caused by different types of speaker or distance.
eGo to “7 Digital Audio Output” and set “1 PCM Down Conversion” to “No” (= page 40).
eTurn off V.S.S. (= page 26) if you have connected a subwoofer, center speaker, or Surround speakers as well as the front speakers. Sound will not
come from the other speakers if V.S.S. is on.