Panasonic DVD-CV50

i Home theater
Selecting digital output
Select the digital output to be output trom the optical or coaxial digital
audio output terminal of the unit.
o
{1
Press
[ACTION]
in
the
stop
mode.
akei
The
initial
settings
screen
is
displayed.
PELE
EE 2 Press the cursor buttons [A, V] to
SELF UE LES select “7 Digital Audio Output” and
= press [ENTER].
3 Press the cursor buttons [A, Y] to
| 1 select the item and press [ENTER].
ACTION 1 PCM Down Conversion
@<Disclanquages — Select whether to output audio on DVD recorded in 96 kHz
En © 2 Ratings Level Sf? linear PCM as is (No) or to convert it to 48 kHz for output
GER 3 Menu Language English — (Yes).
Gam 4 On-Screen Messages e
D 5 FL Display Bright 2 Dolby Digital
WL 6 TV Aspect 4:3, To select the signal format (Bitstream or PCM} to be output
7 Digital Audio Output : from the optical or coaxial digital audio output terminal dur-
GL 8 Speaker Setting é-channel ing play of DVDs recorded in Dolby Digital.
Other Seto: 3 DTS Digital Surround
Press RETUAN to exit
| To select whether DTS Digital Surround bitstream is output
from the optical or coaxial digital audio output terminal or
no digital audio is output during play of DVDs recorded in
DTS Digital Surround.
4 Press the cursor buttons [A, V] to
Sigil Audio Ouipat select the setting and press [ENTER].
"1 POM Down Conversion No —; When “1 PCM Down Conversion” is selected
2 Dolby Digital Bitstream 1 No (Factory preset)
3 DIS Dig’a Sureund Off No digita! audio is output during play of DVDs recorded in
96 kHz linear PCM.
Press RETURN to oxit elf the DVD is recorded in 48 kHz linear PCM, digital audio
: -= l converted to 48 kHz/16 bit is output regardless of the
setting.
eAudio will be output using the original audio recording
system if the DVD has not been copyright-protected.
2 Yes*!
During play of DVDs recorded in 48 kHz or 96 kHz linear
PCM, digital audio converted to 48 kHz/16 bit is output.
(Digita! output of PCM audio is restricted to 48 kHz/16 bit or
below for copyright protection.)
When “2 Dolby Digital” is selected
* 1 Bitstream*2 (Factory preset)
Dolby Digital bitstream (1ch—5.1ch) is output during play of
DVDs recorded in Dolby Digital.
2 PCM
Digital audio converted to 48 kHz/16 bit PCM (2ch) is out-
put during play of DVDs recorded in Dolby Digital.
When “3 DTS Digital Surround” is selected
1 Off (Factory preset)
No digital audio is output during play of OVDs recorded in
DTS Digital Surround.
2 Bitstream*2
DTS Digital Surround bitstream (tch—5.1ch) is output dur-
ing play of DVDs recorded in DTS Digital Surround.
Home Theater ee
#221 Foo
The screen illustrated in step 2 is displayed.
To cancel during setup operation
Press [RETURN]. (The previous screen is displayed.)
To exit the initial settings screen
Press [ACTION] or [RETURN].
ROTS455
A
s