Panasonic DVD-CV50

Advanced Operations a
ROTS455 |
[fe [S&S ee <<, >> SLOW /SEARCH
a sTOP——c =: Ce—G
buttons/
1 Choose a dsc and track, then press ENTER
Track j Disc
"(Unit's FL display)
‘Disc type in the play position Disc no. in the play position
Flashes Program No.
Choose a disc and track. then press ENTER
i | Clear |
| Clear all |
- Example: When disc no. 5, track no. 23 are selected.
4 PLAY
Advanced operations
ee ee on er a ee ee,
de — -
Program play `
Wc)
You can program up to 32 items (discs or tracks) to play in the order
you choose.
{1 Press [PLAY MODE] while stopped.
The illustrated screen appears.
2 Press [DISC 1—5] to select the disc.
Track 1 on the disc is automatically selected.
eTo enter the disc as one item, press the cursor buttons [A,
Yj to select “All” and press [ENTER].
3 Press the numeric buttons to select
the track (= item @ on page 6 for number entry).
è Repeat steps 2 and 3 to enter other discs and tracks.
eTo select tracks on the same disc, simply press the numeric
buttons to select the next track.
4 Press [P PLAY].
The items are played in the programmed sequence.
eYou can enter tracks and discs the unit cannot find, or DVDs, if the
unit has not read the disc, but these are cleared during play.
elf you enter a 33rd item, it replaces item 32.
eYou cannot enter non-existent items, or DVDs, if the unit has read
the disc.
eYou cannot start play by pressing [DISC 1-5] while in the program
mode.
To exit the screen
Press [PLAY MODE] twice.
For your reference
You can also program items with the cursor buttons.
1. Press [PLAY MODE} while stopped.
2. Press [ENTER].
3. Press the cursor buttons [A, Y] to select the disc and press
[ENTER].
4. Press the cursor buttons [A, F] to select the track and press
[ENTER].
Repeat steps 2 to 4 to program other items.
5. Press [> PLAY].
To add or change items
1. Press [B STOP] twice during play to show the program play
screen.
2. Press the cursor buttons [A, ¥] to select an available item, then
repeat program play steps 2 and 3 above.
Press [<4<4, P> SLOW/SEARCH} to turn the pages of the program
to make the selection quicker.
To return to normal play
1. Press (@ STOP] twice during program play.
(Program play is suspended.)
2. Press [PLAY MODE] twice.
3. Press [ PLAY].
The program is retained in memory.
Operation by observing the unit’s FL display
Use [DISC 1-5] and the numeric buttons to enter items.
əTo check the program, press the cursor buttons [A, Y] while
stopped. Each time you press the cursor buttons [A, ¥], the
program contents (disc/track/program number) will be displayed.