1. Unscrew a hex screw (4mm) on the bottom of the Arm rest.
2. Pull the Arm rest backward(1) and pull it up(2) and take it
away.
3. You can remove both Arm rests.
Tips of installing
Insert the Arm rest to the Arm rest holder so that both
triangle marks meet each others, and pull the Arm rest
forward to lock.
10 DISASSEMBLY AND ASSEMBLY INSTRUCTION
10.1. Removing the Arm rest and the Controller stand
10.1.1. Removing the Arm rest
14
EP3203-U1
To Next Page
Loading...
