1. Follow the procedure 10.3 Removing the Massage
mechanism block.
*It is safer to unload the Massage mechanism block.
2. Follow the procedure 10.3 Removing the Under cover.
3. Follow the procedure 10.4 Removing the Under box and the
Under box cover 1 to 4, and disconnect the connectors
blue(CN102- CN111) connecting to the Sub PCB.
4. Remove the Ottoman lift pin long and the Snap pin, and
remove the Reclining lift unit.
*It would be easy to remove the Reclining lift unit if you
unload the Massage mechanism block.
10.5.2. Removing the Reclining lift unit
25
EP3203-U1
To Next Page
Loading...
