66 Text Entry
Text Entry
T9
®
Text Input
Using this mode of text input dramatically reduces the required number of key presses.
Press a key once for any letter you require on that key. The desired letter may not be displayed.
Continue pressing other keys until the end of a word is reached; then check that the word has
been typed correctly before continuing on to the next word. If the combination of letters typed
has produced a word which is not the one you require, press
A repeatedly until the correct
word is displayed. Then continue to the next word.
Example of Text Input in T9 Mode
To type a new message, follow these steps:
1 At the beginning of a new message press and hold @ (Clear) to delete previous text,
if necessary
2 Press C to change letter case, if necessary
3 Press % % ( ( “Call” is displayed
Note that the displayed words change as you type, always type to the end of the word before
editing.
T9
®
Languages can be selected from T9 Input – see “Setting T9 Input” on page 35.
If the word you require is not in the internal dictionary then it should be entered using the
Multi tap (ABC) mode.
To Next Page
Loading...
