Panasonic HC-MDH2 - Attaching the Eye Cup; Attaching the Lens Cap

- 10 -
∫ Adjust the length of the grip belt so that it fits your hand.
∫ Attaching the eye cup
Attach by aligning the notch of the eye cup attachment part with the protrusion at the inside of the
eye cup.
∫ Attaching the lens cap
Protect the lens surface with the lens cap while the unit is not used.





1, 2 Flip the belt cover and the belt.
3 Adjust the length.
4, 5 Replace the belt.
A Notch
B Protrusion


Attach or remove it by pinching on it.