- 66 -
Highlight Playback
Part that was recognised as clearly recorded is extracted from multiple scenes, and it can be played
back or stored in a short time with effects and music added.
It is also possible to create an original Highlight Playback by checking your favourite scenes and
setting up to extract those scenes.
≥ Highlight Playback cannot be used for recorded in [SA 576/50i] or [SX 576/50i].
1 Select the menu.
2 Select the desired effect and press the button in the centre.
≥ The scenes matching the effect will be extracted and displayed in the thumbnail view.
≥ Effects such as fade, slow-motion, still (pause), or digest playback are inserted.
≥ It will be played back with the date of last recording to change the settings, refer to page 68.
3 Select in the thumbnail view and press the button in the centre.
4 Select the playback operation. (l 33, 63)
≥ When the playback is finished or stopped, the screen to select [REPLAY], [SAVE] (l 71),
[SELECT AGAIN] or [EXIT] is displayed. Select the desired item and press the button in the
centre.
≥ Playing back of all the scenes returns if the unit is turned off or the mode is changed.
≥ Slow-motion Playback and Frame-by-frame Playback are not possible.
: [VIDEO SETUP] # [HIGHLIGHT]
[POP]: Recommended for party scene.
[NATURAL]: Recommended for scenery.
[CLASSICAL]: Recommended for slow moving scene.
[DYNAMIC]: Recommended for fast moving scene such as sports scene.
[CUSTOM]: Set the combination of the effect and the music. (l 67)
To Next Page
Loading...
