- 61 -
This will reduce the wind noise coming into the built-in microphones while maintaining the realism.
≥ Switch to Manual Mode. (l 39)
≥ When [Normal] is set, will be displayed on the screen. When [Strong] is set, will be
displayed on the screen.
≥ This function’s default setting is [Normal].
≥ When switching to Intelligent Auto Mode, [Wind Noise Canceller] is set to [Strong], and the setting
cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
≥ This function cannot be set when using an external microphone.
Recording setting of the built-in microphone can be adjusted.
[Wind Noise Canceller]
: [RECORD SETUP] # [Wind Noise Canceller] # desired setting
[Strong]: When a strong wind is detected, this option effectively reduces the
wind noise by minimising the low-pitched sound.
[Normal]: This option extracts and reduces only the wind noise without
deteriorating the sound quality.
[OFF]: Cancel the setting.
[MIC SETUP]
: [RECORD SETUP] # [MIC SETUP] # desired setting
[STEREO MIC]: Records sound from two forward directions.
[ZOOM MIC]: Sound is recorded with changing the directionality in conjunction
with the zoom operation. Sounds near the front of the unit are
recorded more clearly if you zoom in (close-up) and surrounding
sounds are recorded more realistically if you zoom out (wide angle).
MENU
To Next Page
Loading...
