- 84 -
∫ Formatting
This is for initialising the external drive.
≥ Please be aware that if a media is formatted then all the data recorded on the media is
erased and cannot be recovered. Back up important data on a PC etc.
≥ Connect this unit to the external drive and select [Playback from External Drive] and press
the button in the centre.
≥ When formatting is complete, select [EXIT] and press the button in the centre to exit the message
screen.
≥ Connect this unit and the external drive to format.
You may no longer be able to use the external drive if you format them on another device such as
a PC etc.
∫ Displaying media information
The used space of the external drive can be checked.
≥ Connect this unit to the external drive and select [Playback from External Drive] and press
the button in the centre.
≥
If you select [CHANGE MEDIA] and press the button in the centre, you can switch the display
between the SD card 1, SD card 2 and external drive.
If you select [CHANGE MEDIA] and press the button in the centre, you can switch the display
between the SD card, built-in memory, and external drive.
Simple copy
1 Connect this unit to the external drive to prepare for copying. (l 82)
2 Select [Simple copy] and press the button in the centre.
≥ When [Copy selected files] or [Playback from External Drive] is selected, terminate the
connection with the external drive (l 86), and then perform the operation of Step 1.
3 Select the media you want to copy and press the button in the centre.
4 Select [YES] and press the button in the centre.
5 Select [EXIT] and press the button in the centre when the copy complete
message is displayed.
≥ The thumbnail view of the copy destination is indicated.
When you stop copying halfway:
Select [CANCEL] and press the button in the centre while copying.
: [OTHER FUNCTION] # [FORMAT MEDIA] # [EXTERNAL]
: [OTHER FUNCTION] # [MEDIA STATUS]
To Next Page
Loading...
