Panasonic HC-MDH2 - Setting up the Custom Effect

- 67 -
∫ Setting up the custom effect
It is possible to enjoy the Highlight Playback with your favourite effect by setting up the combination
of an image effect and music.
1 Select [CUSTOM] and press the button in the
centre.
2 Select [EFFECT SETUP] or [MUSIC SELECT] and
press the button in the centre.
3
(When [EFFECT SETUP] is selected)
Select the desired effect and press the button in the
centre.
≥ When [EFFECT SETUP] is changed, [MUSIC SELECT] will be set the same as [EFFECT
SETUP]. (To set [EFFECT SETUP] and [MUSIC SELECT] to different settings, change
[MUSIC SELECT] after setting [EFFECT SETUP].)
≥ Select [ENTER] and press the button in the centre.
(When [MUSIC SELECT] is selected)
Select the desired sound and press the button in the centre.
≥ When [EFFECT SETUP] is set to [NONE], you will be able to select [NO MUSIC]. When [NO
MUSIC] is selected, the audio recorded at the time of shooting is played back.
≥ To adjust the volume of the music during playback or viewing, operate the volume lever or the sub
volume lever. (l 35)
≥ Select [ENTER] and press the button in the centre.
(To test the music audio)
Select [START] and press the button in the centre.
≥ Select the other music option and press the button in the centre to
change the music to be tested.
≥ When you select [STOP] and press the button in the centre, the
music playback stops.
4 Select [ENTER] and press the button in the centre.