- 147 -
You can confirm the recording screen of this unit from outside using a smartphone.
≥ Perform the monitoring operation on the smartphone. (l 149)
≥ If this is the first time you are configuring the home monitor settings, please read page 148.
∫ Connecting with Android (NFC-compatible) device
≥ Turn on the NFC function.
Using the NFC (Near Field Communication) function, you can easily transfer data necessary for a
Wi-Fi connection between this unit and the smartphone.
≥ This function can be used with the NFC compatible device with Android (OS version 2.3.3 or
later). (Except for some models)
1 Start up the smartphone application “Image App”.
≥ When a Wi-Fi connection guidance screen is displayed, select [NO].
2 Display the screen of a connection setup to home monitor from the menu of a
smartphone.
3 Touch the smartphone on of this unit.
≥ If the unit is not recognized even when touching the smartphone,
change positions and try again.
≥ A confirmation screen is displayed on the screen of a smartphone.
Touch [YES] to start home monitor.
≥ This unit will be turned on if it is touched on the by a smartphone
even when this unit was turned off using the LCD screen.
Wi-Fi [HC-V720]/[HC-V720M]
Home Cam (Home Monitor)
≥ Before using, perform the preparations for using the Wi-Fi function. (l 125)
≥ Switch the Wi-Fi setting to off on your smartphone and use with mobile network such
as 3G.
≥ Check your contract details carefully, as smartphone and internet contract details may
result in high communication charges being incurred, or a limit placed on
communication traffic.
XXXXXXXXX
Image App
To Next Page
Loading...
