- 35 -
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this
sound.
When [OFF] is selected, the sound is not output at the start/end of recording, etc.
2 Beeps for 4 times
When an error occurs, follow the instructions displayed on the screen. (l 173)
You can change the operation icons (l 56) to display in the Touch Menu.
Register 3 favorite operation icons.
≥ The default settings are, (Fade), (PRE-REC) and (Video Light) for Motion Picture
Recording Mode, and (Built-in flash), (Self-timer) and (Backlight Compensation) for
Still Picture Recording Mode.
1 Select the menu.
2 Touch the operation icon you would like to change to cancel the setting.
3 Touch the operation icon to be set.
≥ Name of the function is displayed by touching and holding on the operation icon.
≥ To cancel, touch the operation icon again.
4 Touch [ENTER].
This makes it easier to view the LCD monitor in bright places including outdoors.
≥ These settings will not affect the images actually recorded.
* It is not displayed in the Manual Mode or in the Playback Mode.
≥ When the AC adaptor is in use, the LCD monitor is set to automatically.
≥ Recordable time with the battery is shortened when the LCD is made brighter.
≥ When the video light is set to ([ON]) or ([AUTO]) and it is lit, it cannot be set.
[ALERT SOUND]
: [SETUP] # [ALERT SOUND] # desired setting
(Volume low)/ (Volume high)/[OFF]
[SELECT OPERATION ICONS]
: [SETUP] # [SELECT OPERATION ICONS]
[POWER LCD]
: [SETUP] # [POWER LCD] # desired setting
(Makes even brighter)/ (Makes brighter)/ (Normal)/ (Makes less bright)/
*(Automatic adjustment)
MENU
+2
0
-
1
A
To Next Page
Loading...
