14
DVQX2232 (ENG)
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other equipment, for the first
time on this unit, format the SD card. (l 24) When the SD card is formatted, all of the recorded data
is deleted. Once the data is deleted, it cannot be restored.
Caution:
Check that the access lamp has gone off.
1 Open the SD card cover and insert (remove) the SD card into (from) the card
slot B.
≥ Face the label side C in the direction shown in the illustration and press it straight in as far as it
will go.
≥ Press the centre of the SD card and then pull it straight out.
2 Securely close the SD card cover.
≥ Securely close it until it clicks.
Access lamp
[ACCESS] A
≥ When this unit is accessing
the SD card, the access
lamp lights up.
Simplified-HC-V785_V787_EBEP-DVQX2232ZA_mst.book 14 ページ ２０２２年５月１０日 火曜日 午後１時５分
To Next Page
Loading...
