22
DVQX2232 (ENG)
1 Set this unit to Playback Mode (l 16).
2 Touch the play mode select icon A (l 18).
≥ You can also set by touching , selecting [VIDEO SETUP]
or [PHOTO SETUP] # [MEDIA, VIDEO/PICTURE]. (l 24)
3 Select the still picture C or the recording
format of the motion picture D you wish to
play back.
≥ Touch [Enter].
≥ If you touch , scenes recorded as Backup for Twin
Camera will be displayed. The recording mode icon
( ) will be displayed on the thumbnail screen, and each thumbnail will be displayed with
one of the following icons:
j AVCHD [PH] scenes recorded as Backup for Twin Camera:
j AVCHD [HA] scenes recorded as Backup for Twin Camera:
j AVCHD [HG] scenes recorded as Backup for Twin Camera:
j AVCHD [HE] scenes recorded as Backup for Twin Camera:
4 (When [AVCHD] or [MP4/iFrame] is touched)
Touch the desired recording format for playback.
≥ When [AVCHD] is selected
≥ When [MP4/iFrame] is selected
≥ The recording mode icon B is displayed in the thumbnail display when the item is touched.
( , , , , (Red), (Red), (Red), (Red)
and )
≥ The following icons are displayed on thumbnails when [ALL AVCHD] or [1080/50i] is touched:
Basic
Motion picture/Still picture playback
[ALL AVCHD]/[1080/50p]/[1080/50i]
[ALL MP4/iFrame]/[1080/50p]/[1080/25p]/[720/25p]/[360/25p]/[iFrame]
j AVCHD [1080/50p] scene:
j AVCHD [PH] scene:
j AVCHD [HA] scene:
j AVCHD [HG] scene:
j AVCHD [HE] scene:
ALL
ALL
MENU
50p
Simplified-HC-V785_V787_EBEP-DVQX2232ZA_mst.book 22 ページ ２０２２年５月１０日 火曜日 午後１時５分
To Next Page
Loading...
